The Dräger X-Zone® 5500 transforms the Dräger personal gas detection instruments X-am® 5000, 5100 and 5600 into innovative area monitoring devices for a wide range of applications. A patented combination for increased safety – in addition to the personal air monitors carried on the body, these area monitors are positioned where gas hazards are expected.
Even from a distance, the illuminated green LED ring indicates that the air is free of toxic and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, thus providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Dräger X-zone 5500 gas entry is located that the gas can diffuse into the Dräger X-am 5000, 5100 or 5600 from all sides.
Up to 25 Dräger X-Zone 5500 can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas. A Dräger X-zone 5500 detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing master alarm in the mother unit detecting gas contrasts with red/green flashing alarms of the connected daughter units providing simple recognition of alarm status and the actual location of the hazard.
With the corresponding configuration, the maximum gas concentration in the monitored area is shown on the display. Combined with the display of the X-zone ID a clear containment of the hazard area is possible.
The 24 Ah battery of the Dräger X-zone 5500 provides up to 120 hours of continuous operation – a complete working week.
The new Dräger X-zone® 5500 with X-zone Com GSM module, sends all data and alarms to your location – by email, SMS and to the Cloud.
Time, place and gas concentration are the most important data in the event of a gas leak. In an emergency, every second counts. Therefore we have developed a more efficient and significantly safer type of area monitoring with the Dräger X-zone 5500, including X-zone Com. With these you can receive and view the measured data and alarms outside of the danger zone.
This module allows you to access the Dräger X-zone 5500 data wirelessly over the GSM network. Be it status requests or alerts via SMS using a periodic delivery of data via e-mail to a FTP server or a cloud service – the X-zone Com GSM module sends all data directly to the device of your choice.
In combination with an X-zone Com up to 15 Dräger X-zone can automatically connect themselves to a wireless alarmchain to accurately and comprehensively monitor large areas. For this only a single X-zone Com is required to retransmit the data of the entire chain. All relevant information such as maximum values of the measured gas type will reach those responsible within seconds.
On the laptop data of the Dräger X-zone 5500 group can also be displayed via Bluetooth®. With the integrated GPS module, the position of the X-zone Com and thus the location of the hazard source is transmitted. A data logger continuously stores the measured values. This ensures that no data is lost. Analysis of trends are simply in the cloud possible. Thus, all important measures covering evacuation and protection as well as the elimination of the problem and the resumption of work can be implemented quickly, efficiently and, above all, safer.
|Dräger X-zone® 5500, 868 MHz, 24 Ah battery with diffusion cap||1||8324819|
Dräger X-zone® 5500, 868 MHz, 24 Ah battery with diffusion cap
|Dräger X-zone® 5500 with integrated pump, 868 MHz, 24 Ah battery with diffusion and pump cap||1||8324821|
Dräger X-zone® 5500 with integrated pump, 868 MHz, 24 Ah battery with diffusion and pump cap