Aluminium rescue tripod with adjustable legs. This aluminium rescue tripod is designed for rapid set up to be used with a Bracket Assembly on the rescue tripod leg and a Pulley Wheel complete with karabiner, so an Fall Arrest Block can be used.
Aluminium rescue tripod with adjustable legs to EN 795 Class B. This aluminium rescue tripod is designed for rapid set up to be used with a Bracket Assembly on the rescue tripod leg and a Pulley Wheel complete with karabiner, so an IKAR HRA Device can be used.
Maximum user rating 2 persons or 1 person and a load winch to 250 Kg SWL. The rescue tripod is adjustable in height from 1.44 to 2.42 m. The set up diameter of the legs ranges from 0.99 to 1.55 m. The weight of the rescue tripod is 19 kgs.
Fall Arrest Block HRA24 with an integral recovery mechanism, 15.0 m steel rope lifeline in an aluminium housing to EN360:2002 and EN1496
This aluminium housed fall arrest block is a sturdy, low maintenance device fitted with a steel rope lifeline, terminated with a steel double action hook. The attachment anchorage point on the fall arrest block is an open steel handle, suitable for connection via a Standard Karabiner type connector, or a Standard Karabiner type connector with an Anchorage Sling, or a Large Karabiner.
In addition to connecting the fall arrest block with recovery mechanism via the steel handle, it can also be used in conjunction with a DB-A2 aluminium tripod, to protect the user when ascending and descending a vertical shaft i.e. entry into a sewer system.
This fall arrest block also has a built in recovery mechanism, which is engaged by pulling a pin on the side of the block and engaging a winding handle. This then allows the device to be used to lift or lower a casualty post fall, or if they have become incapacitated in a confined space.
The lifeline in this fall arrest block has been tested in a simulated fall over an edge and passed the German draft amendment EN360. However, not all "edges" will react in the same way as the tested steel edge, so when using this fall arrest block, every effort must be made to ensure that in the event of an arrested fall, the lifeline does not pass over an edge.
The dimensions of this block are: 630 x 275 x 110 mm. The weight of the block is: 16.0 kgs.
Mounting bracket for attaching a load winch 41-Z7 onto an aluminium tripod. This mounting bracket is bolted onto one leg of the tripod and then allows the Load Winch to be attached to the tripod. The weight of the bracket is 1.0 kgs.
Swing cheek pulley and karabiner for attaching a HRA lifeline. This swing cheek pulley is clipped onto the eye bolt at the top of the tripod with the HRA lifeline passing through it. The pulley is made from stainless steel and comes complete with screw gate karabiner. The weight of the bracket is 1.1 kgs.
Standard karabiner hook with screw gate for attaching fall protection equipment to a suitable anchorage point to EN362. This standard karabiner hook is made from heat treated steel and has a gate opening size of 19 mm. The weight of the karabiner hook is 0.16 kgs.
|Rescue Tripod, aluminium, basic||1||SG04201|
Rescue Tripod, aluminium, basic
|Stopmax/Ikar Rescue block: length 24 meters excl holder/adapter||1||SG04205|
Stopmax/Ikar Rescue block: length 24 meters excl holder/adapter
|Stopmax/Ikar Rescue block: length 12 meters excl holder/adapter||1||SG04204|
Stopmax/Ikar Rescue block: length 12 meters excl holder/adapter